Description: Replacement part for garage door torsion spring. Includes (1) One Pair of Coated Oil Tempered Garage Door Torsion Springs with wire size of .225& Inside diameter of 2".(Additional Coil Sizes, Inside Diameter and Lengths are Available, Message Us for Quote)Please read the below information to help you measure torsion springs correctly & to ensure the accurate springs are ordered. When you buy from us we include (1) one Pair of Springs (1 Right Wound, and 1 Left Wound)This listing also available below options from the dropdown List:Replacement Center BushingSteel Center BearingWinding Rods Currents springs measurements: Wire size is .225" Inside Diameter is 2"10,000 cycles (when measured and installed correctly)Standard Cones already installed on the springs Springs are Made of Oil Tempered USA Made Spring Steel, and are coated to resist rust, and for longer life Technical and Installation Support is Available by Phone or Email. How to select the correct spring (Please Read the Below Instructions Entirely Before Placing an Order)IMPORTANT: if the spring is not replaced with equal match in all measurement, it may not function correctly and cause damage to door or operator motor. Please message us before placing order if you have and questions or not sure if correctly identified all the measurements. 1.Find your spring Wire Diameter. Measure the length of the 10 coils with measurement tape. On below table locate wire size according your measured length of the 10 coils. To make sure your got wire size correctly you can measure 20 coils and locate wire size in table below table. If both measurements match you got right measurements. If not, try in different area of the spring. Make sure there is no gaps between wire to avoid incorrect measurements. 10-Coil Measurement 20-Coil Measurement Wire Size in cm in cm 1 3/4" 4.5 3 1/2" 8.99 0.177 1 7/8" 4.76 3 3/4" 9.53 0.187 1 15/16" 4.88 3 7/8" 9.75 0.192 2" 5.08 4" 10.16 0.200 2 1/16" 5.26 4 1/8" 10.52 0.207 2 3/16" 5.55 4 3/8" 11.11 0.218 2 1/4" 5.72 4 1/2" 11.45 0.225 2 5/16" 5.95 4 5/8" 11.9 0.234 2 7/16" 6.19 4 7/8" 12.38 0.243 2 1/2" 6.35 5" 12.7 0.250 2 5/8" 6.67 5 1/4" 13.34 0.262 2 3/4" 6.93 5 1/2" 13.87 0.273 2 13/16" 7.19 5 5/8" 14.38 0.283 2.Find your spring Inside DiameterSimply measure inside diameter if your spring is broken. You can also measure outside diameter and deduct wire size x2. For this items outside diameter should be calculated below:2.414 (Outside diameter) - (Wire Size) 0.207 x 2 (sides) = 2.000 (Inside Diameter)Also most of the cones has a manufacture stampings which will help determine the ID (inside Diameter) P200 or P2000 will be stamped on the cones for a 2? ID (inside Diameter) and P175 for a 1 3/4" ID. The most common sizes in residential springs are 1 3/4" and 2" (Raynor doors use a 2 ΒΌ? ID).3.Find your spring LengthTo measure spring accurately make sure to take spring tension off to its unwind position. Otherwise measurements will be off by few inches.If spring still in one piece: Please make sure to measure to measure spring ?snake? only, DON?T include cones on both sides. If spring broken in half or more: Measure each spring ?snake? piece only and add measurements together to get total length. WE HAVE MANY OTHER REPAIR AND REPLACEMENT PARTS OF ALL BRANDS OF OVERHEAD GARAGE DOORS. SOME PARTS ARE IN PROCESS OF LISTING SO MESSAGE US IF YOU LOOKING FOR SOMETHING THAT WE HAVENT LISTED THOUGHT EBAYCAUTION: Installing or repairing a garage door can be dangerous task. Garage door springs and cables are under extreme tension and require appropriate safety precautions. Working with garage doors and openers could result in personal injury or death. We recommend all installations, repairs, adjustments, and removals on garage doors be made by a qualified garage door technician. Any attempts to install, repair, replace, adjust garage doors or openers are done at your risk. In no event shall MY GARAGE DOOR PARTS be liable for damages of any kind, personal injury or death. User assumes all responsibility/risk for use of information and products purchased. By purchasing our products you agree to these terms.RETURN POLICYReturns are accepted within 30 days of the date that the item is received.We don't offer exchanges. If a different item is needed, the item not needed can be returned and another item purchased. Buyer is responsible to pay for the return shippingIf an item is listed with 'free shipping', a 20% restocking fee will be deducted from the refund amount. All items MUST be returned in the same condition as they were when you received them. If an item is returned damaged or in any way visibly used, an additional deduction will be taken from the refund amount.
Price: 110 USD
Location: Spring, Texas
End Time: 2024-08-20T20:56:02.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: My Garage Door Parts
Type: Torsion Springs
Custom Bundle: No
Style: Modern
MPN: 1001
Country/Region of Manufacture: United States
Modified Item: No
Available Variations
Color: 24"
Price: 110 USD
Available Quantity: 10
Quantity Sold: 10
Color: 25"
Price: 111 USD
Available Quantity: 10
Quantity Sold: 8
Color: 26"
Price: 112 USD
Available Quantity: 10
Quantity Sold: 10
Color: 27"
Price: 113 USD
Available Quantity: 10
Quantity Sold: 8
Color: 28"
Price: 114 USD
Available Quantity: 10
Quantity Sold: 8
Color: 29"
Price: 115 USD
Available Quantity: 10
Quantity Sold: 1
Color: 30"
Price: 116 USD
Available Quantity: 10
Quantity Sold: 2
Color: 31"
Price: 117 USD
Available Quantity: 10
Quantity Sold: 10
