HFD2 20 ga XL Breacher / Standoff Fits Mossberg 500 20 ga / M5L20

Description: This is our model designed specifically for the Mossberg 500 20ga. It simply attaches to your Take Down Screw, giving you a cost effective breacher / standoff device. This "Pumkin Puncher" will also fit the Mossberg Maverick 88 and similar shotguns with a 7/8" steel take-down screw on the front of the mag tube. This model, the M500-L-20, is designed to fit a shotgun with a STAGGERED LENGTH barrel to mag tube ratio such as commonly found on Mossberg 500's with an 18.5" barrel. If you have an older take down screw that is approximately 1/4" thick, you will need to replace it with a newer 3/8" thick TDS from Mossberg or Uncle Mikes... This “Pumkin Puncher” is machined from 6061 T6 aluminum and as such, may exhibit some machining marks. It is then anodized flat black and branded. A quick swipe with a black permanent ink pen will camouflage the etching if you so desire. What you’ll receive:The stated device, instructions, all necessary machine screws, washers, allen screws and hex wrenches for your specific item along with a pack of VC-3 thread lock. You will need a phillips screwdriver and/or a 3/8” socket or similar. A very easy install. Dimensions are as follows: An OAL of 4.630. A working length of 4.235, from the face of the take down screw to the tips of the teeth, and an OD of 1.250. Dimensions are approximate. Please see our other listings for more HFD2 options. Shipping to the continental U.S.A. ONLY. Shipping is FREE. PLEASE ASK ANY QUESTIONS you might have about our products. They will be answered as soon as possible. NO WARRANTY EXPRESSED OR IMPLIED! PURCHASER / OPERATOR ASSUMES ALL RISKS RELATED TO THE USE OF THIS ITEM! “U.S. Pat. No. 9,291,418”

Price: 44.95 USD

Location: Salem, Utah

End Time: 2024-03-07T10:29:57.000Z

Shipping Cost: N/A USD