GTO Keypad F320 - GTO Heavy Duty Wired Keypad - Used on Residential & Commercial

Description: GTO Keypad F320 - GTO Heavy Duty Wired Keypad - Used on Residential & Commercial GTO Keypad F320 - GTO Heavy Duty Wired Keypad - Used on Residential & Commercial The F320 is a wired digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. The F320 is for use indoors or outdoors. Ideal for perimeter access control, it can be programmed for up to 120 entry codes for added security. Specifications / Features: KEYPAD PROGRAMMABLE 120 ENTRY CODE CAPACITY 1-6 DIGIT ENTRY CODE LENGTH 4 INDEPENDENT OUTPUTS (TIMED/TOGGLED) 4 INDEPENDENT TIMERS EACH ENTRY CODE CAN BE PROGRAMMED TO ACTIVATE EITHER OR BOTH RELAYS RELAY CONTACTS ARE FORM “C” (N.O. & N.C) SOLID STATE OUTPUTS ARE OPEN COLLECTOR SWITCH-TO-COMMON TWO LED INDICATORS COURTESY LAMP PIEZO SOUNDER TIMED ANTI-PASSBACK (LAST 3 VALID ENTRIES) KEYPAD LOCKOUT TACTILE KEY FEEL DOOR SENSE INPUT INHIBIT INPUT REQUEST-TO-ENTER INPUT The F320 is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 120 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a Amp capacity. Two LED indicators show the status of the entry system. The left LED lights red to indicate power, then turns green when access is granted. The right LED lights yellow when the keypad is in “lockout” condition (from too many incorrect code entries). The keypad’s courtesy light can be always off, always on or be programmed to illuminate from 1-4 minutes after any keypress (default 2 minutes). An internal sounder beeps when each key is pressed. The DOOR SENSE/INHIBIT input can be used two ways. If programmed for “door sense”, a switch on the door detects forced entry or door ajar situations. If programmed for “inhibit”, the input can be wired to a “service” switch or automatic timer that will disable the Relay #1 when required. The REQUEST-TO-ENTER input can be wired to a pushbutton or fire access keyswitch to provide codeless entry for authorized personnel. The “anti-passback” feature prevents using the same code twice before the programmed time elapses. The ALARM SHUNT output activates when access is granted. This output can be wired to shunt alarm contacts on the access door/gate to prevent triggering of an alarm when authorized access occurs. Two solid state outputs, capable of switching 100 mA to common, are programmable to signal forced entry, door ajar, lockout, alarm circuit shunting, request-to-enter, and keypad active conditions. The F320 is powered from a 12-24 Volt AC or DC source. Power can be obtained from the access device or a separate power supply. The EEPROM memory retains all entry codes and programming, even without power. Payments & Returns Policy

Price: 219.61 USD

Location: Miami, Florida

End Time: 2023-09-13T13:39:51.000Z

Shipping Cost: 0 USD