Description: Looks like NEW! Only 9 months old, used in classroom. Comes with New 3 year Mfg & 15 year Heater Warranty from Vastex Video of dryer in our classroom https://youtu.be/pgkGtlsqrOQ?si=SG5gHNPG9BQHq2Jk #1 Vastex Dealer in the World for SalesOver $250k Inventory, Nationwide shipping or Pick up Atlanta Vastex Big Red 4D-30 30" x 8.75' Free Standing Conveyor Dryer with Digital ControlsNationwide Shipping or Pick Up in Atlanta In-stock in our Atlanta Showroom Vastex Big Red 4D 30" x 8' 9" Dryer Big Red 4D 30" is a High production, floor standing, dryers with Forced AirRated 475 Plastisol or 216 Waterbased or Discharge per hourDTG White Ink 72 at 2.5 min240V , 51 amps, Single Phase - $1.14 hour to operateHighlights* 30" wide belt by 8.75' length* Digital Temp Control* Digital Belt Speed Control* Cures Plastisol, Waterbased & Discharge Inks* Up to 475 pieces per hour* Unique cool down as garment exit chambers* High output Booster panel at entrance* Adjustable Heater Height* 15 Year Heater Warranty* Upgradeable, Add on additional Belt extension and heat chamber to increase productionOptional 3 phase power, 208,380 & 480 available for additional chargeBigRed® 4D Series dryers are the largest and most powerful dryers engineered specifically for DTG digital inks and/or screen-printed plastisols, water-based inks and discharge, making them ideal for Kornit® and other high-volume DTG shops, as well as automatic screen printing operations requiring high capacities. Model BR4D-V30 with a 30 in. (76 cm) wide belt and four 24 in. (61 cm) wide heaters (total 11,400 watts) cures 72 garments/h printed with DTG/digital white ink at 2.5 minutes dwell time, 216 garments/h with water-based ink or discharge, and 475 garments/h with plastisol ink.Capacity of both models can be doubled, tripled or quadrupled by adding one, two or three modular heating chambers and conveyor belt extensions — as new or when needs grow.All BigRed D Series dryers feature a high-powered pre-heating zone that surges ink temperatures past 300°F (149°C) within the first several inches of conveyor travel, maximizing dwell time at optimum curing temperatures and, in turn, conveyor belt speeds and dryer output.Air intake fans located below the roof of the enclosure quietly draw 'make-up' air into the chamber's double-walled shell through filtered inlets along opposite exterior sides at rates up to 560 cfm (15.6 m3/min), serving to cool the outer shell for safety, while preheating the incoming air.An exhaust fan located below the center of the conveyor belt draws the preheated air downward at rates up to 900 cfm (25.5 m3/min), over the garment and through the belt, removing heat, moisture and contaminants from the chamber.To accommodate each shop's layout, the 6 inch (152 mm) diameter exhaust fan outlet rotates 360 degrees for connection to ductwork, and the control box can be located on the right (standard) or left side of the chamber.Exhaust filters located on both sides of the conveyor prevent garment lint from entering the blower or exhaust stack. Cleaning all filters before or after each shift can be accomplished in one minute, safeguarding printed images, the equipment and the shop environment.Exhaust flow sensors with warning lights alert operators to a clogged exhaust line, clogged filter or blower failure. Other safety features include a light tower to monitor dryer status, and a 'cool down mode' for powering down.Dual digital PID temperature controls maintain accuracy to +/-1°F (+/-0.5°C).The heaters of the BigRed 4D dryers carry a 15-year warranty, and feature closely spaced coils that provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under curing associated with conventional units. EXPANDABLEDryer grows with Your Business, simply Add additional Belt length and heat chamber in the future, dryer doubles in production and becomes BigRed 4D-2 Dual chamber OptionsAdditional Belt length 18" or 36" lengthRolling CasterHeavy Duty Belt motor - recommended with extended belt length Shipping is LOWER 48 States ONLY! Time is an estimated arrival date based on our Average shipping time via eBay. Holidays, Trade Shows and weather may cause a delay.
Price: 11995 USD
Location: Atlanta, Georgia
End Time: 2024-08-15T13:29:15.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Vastex
Type: Conveyor Dryer
Voltage: 240 V
Model: Vastex 4D-30
Conveyor Dryer Parts/Accessories Type: Heat Control
Exposure Unit Form: Stand
MPN: BR4D-V30
Country/Region of Manufacture: United States
Conveyor Dryer Type: Infrared Dryer
Power: 240V
Belt Size: 30 in
