Description: Crestron HZ-SWEX-B Horizon™ In-Wall Switch with infiNET EX® Wireless Communication, 120 VAC, Black The HZ‑SWEX is a Horizon™ in‑wall switch that controls incandescent, magnetic low voltage, and tungsten‑halogen loads as well as electronic ballasts and 1/2 HP motors. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations. *Faceplate Sold Separately* The HZ‑SWEX is a Horizon™ in‑wall switch that controls incandescent, magnetic low voltage, and tungsten‑halogen loads as well as electronic ballasts and 1/2 HP motors. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations. NOTE: Faceplates are not included. Refer to the HZ-FP-G series faceplates for more information. Integrated Keypad Supporting up to five buttons, the HZ‑SWEX is configurable for a variety of applications. Because the switch is attached to the Crestron® network, it can function as a keypad to trigger remote actions. Multiway Control The HZ‑SWEX supports load control from multiple locations. Up to four HZ‑KPEX or HZ‑AUX devices1 can be connected to a traveler wire in a traditional three- or four-way circuit to switch the load attached to the HZ‑SWEX. The HZ‑KPEX provides backlit, engravable button caps for multiway control, while the HZ-AUX provides a single large rocker button. Multigang Expansion Up to four devices may be installed side‑by‑side in a multigang electrical box with a compatible Horizon faceplate (HZ‑FP‑G series).1 All buttons in a multigang arrangement align to form one continuous control surface. infiNET EX Communications infiNET EX wireless technology provides two‑way RF communications throughout a residential or commercial structure without the need for physical control wiring. Each infiNET EX device acts as an expander by sending command signals to other infiNET EX devices in range (approximately 150 ft (46 m) indoors) to ensure reliability and stability.2 The HZ‑SWEX communicates with a control system via a CEN‑GWEXER1 or newer infiNET EX Wireless Gateway. Up to 100 infiNET EX devices may coexist on a wireless network. Field-Replaceable Button Caps The preinstalled rocker button cap on the HZ‑SWEX is field replaceable, allowing for engravable multi‑button configurations. Multicolor Backlit Button Engraving Horizon button caps are laser engravable to identify each button's function. RGB LED backlights illuminate the engraved labels and can be adjusted for custom color backlighting. A built‑in ambient light sensor enables auto‑dimming of the backlight brightness according to day and night mode presets. Each button's backlight provides feedback by changing color, intensity, or both. The backlight can also flash to show that an action is being performed. Customizable Faceplates Horizon device faceplates (sold separately) are customizable for any décor. Color‑matched top and bottom trim pieces may be swapped easily after installation with custom trim fabricated from solid materials such as wood, metal, marble, engineered stone, or Corian® solid surface. Paintable trim is also available separately. Note: The faceplate trim is attached magnetically, which may inhibit use in locations where tampering may occur. Key FeaturesSupports multiway controllers (HZ‑AUX, HZ‑KPEX)Single‑gang U.S. wall box installationRequires neutral wire connectionGangable up to four across using Crestron® Horizon™ device compatible multi‑gang faceplates (HZ‑FP‑G series, sold separately)Robust infiNET EX® wireless communicationPreinstalled large rocker buttonConfigurable with up to five field‑replaceable buttonsCustom backlit laser‑etched engravable buttonsMulticolor RGB LED backlightingAuto‑dimming day/night backlight modesLocal button for load control without programmingFully programmable via a Crestron control systemCrestron Home™ OS 3 compatible
Price: 352 USD
Location: La Quinta, California
End Time: 2024-02-07T22:23:28.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Crestron
Type: In-Wall Switch
Custom Bundle: No
Features: Crestron Home™ OS 3 compatible, Fully programmable via a Crestron control system, Local button for load control without programming, Auto‑dimming day/night backlight modes, Multicolor RGB LED backlighting, Custom backlit laser‑etched engravable buttons, Configurable with up to five field‑replaceable buttons, Preinstalled large rocker button, Robust infiNET EX® wireless communication, Requires neutral wire connection, Single‑gang U.S. wall box installation, Supports multiway controllers
MPN: HZ-SWEX-B
Country/Region of Manufacture: United States
