Description: You're buying the chip breaker and retaining screw, shown in the photos.This chip breaker measures just under 2-3/8" in width, and just over 5-3/4" in length.The origin and manufacturer of this chip breaker is unknown to me, though it very much resembles the pattern of the Birmingham plane company chip breakers, exhibiting the more square depth adjusting slot then most other manufacturers. NOTE DIMENSIONS BELOW;NOTE : the depth adjusting slot is approximately 4-1/2" from the lower edge of the chip breaker, this distance is somewhat farther than the usual distance of approx. 3- 3/4", which is the norm on steel bottom planes planes.This configuration is consistent with that of Transitional plane frogs with lateral adjusters..BE CERTAIN THIS CONFIGURATION WILL FIT YOUR FROG BEFORE PURCHASING.This chip breaker is in very good condition, was carefully cleaned and oiled.
Price: 15.5 USD
Location: Finlayson, Minnesota
End Time: 2024-09-03T16:54:59.000Z
Shipping Cost: 6.5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: uncertain
Original/Reproduction: Vintage Original
Country/Region of Manufacture: Unknown
