Auto Signal Generator Vehicle Hall Sensor Crankshaft Position Simulator 2Hz-8KHz

Description: *All the technical parameters and testing show pictures are only for the Brightwin NEW VERSION ORIGINAL Car signal generator. *Life-time technical support and after-selling service. 100% quality warranty. Buy with confidence. *This XH-2A Auto Signal Generator is NOT a Precision Industrial Sine Wave Signal Generator or square wave signal generator, kindly noted. It is a Car Hall sensor, magnetoelectric sensor, Crankshaft sensor, speed sensor, etc. signal simulation and testing device for car repairing purpose. Car sensor signal is NOT the standard precision Sine wave signal, if you need high precision industrial Sine wave signal generator, please buy Industrial Sine Wave signal generator, thanks. Main Functions -Crankshaft position sensor signal simulation output: including 9 types of gear missing teeth signal: 58+2(60-2), 58+1, 57+2, 57+1, 37+1, 36+2, 35+1, 34+2, 22+1. - One type of standard 60+0 signal simulation output. -Magnetoelectric signal or Hall signal output. Output amplitude/Peake volt equals to power supply input, can be adjusted by adding potentiometer. -Use 60+0 signal to simulate vehicle speed sensor signal output. Camshaft sensor signal simulation. - Use 60+0 signal to drive odometer or test odometer. Use it to drive car motor PC board or speed meter. - ABS sensor, optical sensor signal simulation. Use it to analyze and inspect sensor error, car ECU and meters error. Output Parameters -All types of signal have been embedded inside the signal generator, and can be displayed in LED screen for selection reference, no need to download software. -One button switch between magnetoelectric signal and Hall signal, convenient to use. -9 ranges of frequency selection, accurate frequency output. -01 refers to 2Hz-1KHz frequency range. -02 refers to 2Hz-2KHz frequency range. -03 refers to 2Hz-3KHz frequency range. -04 refers to 2Hz-4KHz frequency range. -05 refers to 2Hz-5KHz frequency range. -06 refers to 2Hz-6KHz frequency range. -07 refers to 2Hz-7KHz frequency range. -08 refers to 2Hz-8KHz frequency range. -09 refers to 2Hz-100Hz frequency range. -When the signal generator output is higher than 2HZ, press SET button, it can output 10 types of signal, 60-0 represents standard magnetoelectric or Hall signal output, the other 9 types of signal are magnetoelectric or Hall gear missing teeth signal (Crankshaft position sensor signal). * User can use multimeter to check output signal type. Use multimeter (20V measurement) to test the signal generator output, it output is about 5.8V, its output is Hall signal, if output is 0V, the output signal type is Magnetoelectric signal. About Operating Power Supply Input: -The operating power supply of that signal generator is 12VDC, user can use the 12V power supply for the Battery of the car, or user any other 12V regulated switching power supply or AC/DC power adapter. *If the Battery or Power supply is lower than 12VDC, this signal generator LED is flashing and cannot work normally. Pls do ensure the Car battery or power supply is 12Vdc. About Signal Output GND -If use Hall signal output, signal output GND and the operating power supply GND are in common ground, if use the 12V operating power supply from the battery of the car, user only needs to connect Signal output positive wire. - If use magnetoelectric signal output, signal output GND and the operating power supply GND are NOT in common ground, user must correctly connect both the output signal positive wire and output signal negative GND wire, thus the signal generator can operate normally. BRIGHTWIN Auto Signal Generator packing contents: 1 x Original auto vehicle signal generator with testing clips from Brightwin 1 x Power supply cables 1 x Professional English User Manual

Price: 37.99 USD

Location: Shenzhen

End Time: 2025-01-17T18:47:00.000Z

Shipping Cost: 0 USD