6" LED Down Light High Lumen Prescolite LED Dimming Recessed 120

Description: 6" LED Down Light High Lumen Prescolite LED Dimming Recessed 120 - 277 Volt 0-10V Dimming Option, Commercial Grade ******Note - if you buy more than one of these, the shipping quoted charged to you will probably actually be less than the actual price to me. I don't see any way to fix this, as, the shipping calculator adds to the weight as it should, but doesn't add to the dimensions. So, if you buy more than one I'll probably be requesting the difference in the shipping cost. Or, just send me a message beforehand letting me know how many that you want and I can make a separate listing with correct shipping dimensions.***** These are new old stock, a couple are open box. Some of the boxes show storage wear. They're surplus from an electrical job at the local university. These are 4500 lumen, 3500 Kelvin. Ceiling Cutout: 61/4" Maximum Ceiling Thickness 11/4" If you're local to west Cincinnati, you can pick these up and save the shipping cost. APPLICATIONS: LiteFrame Commercial LC6HL is a 6" commercial grade high lumen LED downlight with two available outputs of 4500 and 6000 lumens. This is suitable to replace many HID downlighting applications, while realizing substantial energy and maintenance savings. Rated for a minimum of 50,000 hours life (70% lumen maintenance) with ambient plenum temperatures up to 35ºC (45L) and 30ºC (60L). Free Air Flow around fixture is required for optimal life performance. This product is not recommended for use with 3rd party "FIREHAT" or insulation barriers. HOUSING:One-piece 22 gauge non-corrosive steel platform. Pre-wired J-box with snap-on cover for easy access. Snap-in connection from driver compartment allows easy installation of light engine/trim assembly and can be upgraded to accommodate technology improvements. Approved for 8 (4 in/4 out) No. 12 AWG conductors rated for 90°C through wiring. REFLECTOR:High purity aluminum, Alzak, iridescence suppressed, semi-diffuse reflector. Self-trim standard. Painted white self-trim (WT) available as option. LED LIGHT ENGINE:The LC6HL uses high power Cree LEDs, specifically mixed to provide a minimum of 80 CRI with 3 SDCM color consistency. The use of multiple high power LEDs allows for optimal thermal management by effectively spreading the heat over a larger area and eliminating hot spots on the LEDs. A diffuse, yet highly transmissive lens obscures the view of the LEDs and creates a smooth, even look from below. The light engine is available in multiple Kelvin temperatures and the system is designed to provide optimal life and lumen maintenance (50,000 hours at 70% lumen maintenance). The reflector/light engine assembly is mechanically retained to the housing. LED DRIVER: The LC6HL utilizes a 95 watt constant current Philips Advance LED driver. This driver is capable of running all lumen outputs, resulting in a reduction of housing skus and simplified specification. The driver is UL8750 and Class II compliant. DIMMING:The LiteFrame Commercial HL series comes standard with 0-10V dimming down to 5%. For the sizing of the control circuit, the dimming circuit may require up to 2mA of sink current. INSTALLATION:Light commercial bar hangers included. Universal adjustable mounting brackets also accept ½" EMT conduit or 1½" or ¾" lathing channel (by others) or Prescolite 24" bar hangers (B24 or B6). CERTIFICATIONS: CSA certified to US and Canadian safety standards. Suitable for wet locations. Wall wash option is damp location rated only. Approved for through branch wiring. Non-IC rated. Product is marked spacing and must be installed with the following minimum spacings:Center to Center of adjacent luminaires: 24”Minimum Overhead Clearance: 8-1/2”(To bottom of metal pan)Center of Luminaire to Side of Building Member : 12”

Price: 35 USD

Location: Harrison, Ohio

End Time: 2024-11-28T03:26:02.000Z

Shipping Cost: 0 USD