2Pack 5052 H32 Thin Aluminum Sheet Metal 12 x 12 x 1/64 (0.02”)

Description: Why choose us? - High quality and product retroactivity reliable and improving competitiveness - The surface is smooth and flatness is high, the naked eye can not see the inside of the factory through a variety of instruments strictly tested, such as direct reading spectrometer, ultrasonic flaw detector, hydrogen detector, cross section scanner, scanning electron microscope. - High plasticity and corrosion resistance, cannot be strengthened by heat treatment, good plasticity during semi-cold work hardening, low plasticity during cold work hardening, good corrosion resistance, good weldability, and can be polished. - Uses are mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil pipes, various liquid containers and other small-load parts made by deep drawing: Wire is used to make rivets. - 5052 H32 used in decoration, packaging, construction, transportation, electronics, aerospace, bus body, scaffolding, power transmission tower, furniture, ship equipment and hardware, etc. Specification: - Name: Aluminum Sheet & Plate - Color: Silver - Model: 5052 H32 - Tensile strength (σb): 170～305MPa - Conditional yield strength σ0.2 (MPa)≥90 - Elastic modulus (E): 69.3～70.7Gpa - The annealing temperature is: 345°C. - Package lncludes: 2Pcs 12 in Width x 12 in Length x 1/64 in (thick) 5052 composition list: Aluminum Al: margin Silicon Si: ≤0.25 Copper Cu: ≤0.10 Magnesium Mg: 2.2~2.8 Zn: ≤0.10 Manganese Mn: ≤0.10 Chromium Cr: 0.15～0.35 Iron Fe: ≤0.40 Note: Single: ≤0.05; Total: ≤0.15 Note: If you have any questions about our aluminum sheet metal set, please feel free to us. 【5052 H32 Aluminum Sheet Size】2Pcs 12”（L）x12”(W)x 1/64” (0.5mm)(thick). 【Durable Material】5052 is an AL-Mg series alloy, which is the most widely used anti-rust aluminum, with high hardness, corrosion resistance, excellent processing performance and welding performance. But cannot be strengthened by heat treatment. 【Flat & Smooth Cutting Surface】All the aluminum plates are precisely cut and the surfaces are processed to be smooth and flat with no crack or airhole. 【Double-Sided Protective Film】Our aluminum plates are equipped with a double-layer wear-resistant and durable protective film, which can protect the aluminum plate from damage during transportation, making it better preserved and durable. 【Widely Used】5052 is softer than 6061 aluminum, which can be bent and processed better. 5052 H32 Used in the manufacture of aircraft fuel tanks, fuel pipes, as well as sheet metal parts of transportation vehicles and ships, instruments, street lamp brackets and rivets, hardware products, electrical-device housings, etc.

Price: 20.87 USD

Location: Monroe, Louisiana

End Time: 2024-10-28T01:47:01.000Z

Shipping Cost: 0 USD